Hellracer - BG's- 'Hades' The saga continious 21-08

**Posted:** Fri Aug 08, 2014 8:05 am

I all ready have 2 underneath the car... :lol:

probably need more, we shall see. We will try to pass the MOT with a European spec ECU which should work better with the lambda sensors and, I hope, will match to the emission standards

the rainbows and kittens sounds really nice

**Posted:** Tue Aug 12, 2014 3:26 pm

better that then unicorn farts

**Posted:** Sat Aug 16, 2014 9:33 am

Quote:

SO I have a j-spec KLZE with a J-spec gearbox managed by a J-spec KL31 Ecu... very Japanese :P
Now I have to sort everything out for the MOT

This is what the Passenger side (RHD) CV looks like for a Mazda Lantis R VLSD optioned transmission.

I understand that the spiral cuts in the shaft are required for lubrication purposes.

**Posted:** Sat Aug 16, 2014 9:49 am

holy crap, are you willing to sale?

**Posted:** Sat Aug 16, 2014 10:06 am

our test drive went great. The mod'd axle hold it, stayed in the gearbox and everything is dry.
this new engine, with the kl31 ecu goes link stink! its real bizar! :badgrin:

**Posted:** Mon Aug 18, 2014 11:40 am

So the car is running like it should. Unfortunately the KL31 ecu is not working for MOT, when we turn the lights on the engine stalls.
After a good search we'd discovered that the ECU needed to be replaced. No problem lot of ecu's on stock

The car is running as a madman. Only MOT sorting out. Some rear brake disks are ordered, few other parts as well so when the MOT is done I have to test drive it allot. 500km is required to determine if its okay or not.

Allot of work is still to be done, there is a client waiting for his car and I also have to finish my house extension before JAE because Iris (my girl) an I expecting our first baby in October

So I'm pretty much working my butt off to finish everything.

but I will be at JAE with my car, don't care how but I am there (yes... with a tent :lol:

)

**Posted:** Mon Aug 18, 2014 1:57 pm

Congratulation Adri! didn't know you were becoming a dad soon mate!

Is there a massive performance difference now then? Glad youve managed to get most of work done and can't wait to see the car at JAE

**Posted:** Mon Aug 18, 2014 2:02 pm

Well, Barreljan his N/A Klze did a 215bph with stock KF ECU, so lets say this one does the same... means that is has 20bph more...
but the Dyno will say more/less, the KLDE with KL31 ECU had a 192bph (25bph more than stock figures)

oh and I have taken almost an extra 10kilos out of the car :evil:

**Posted:** Mon Aug 18, 2014 8:07 pm

Sod the wedding taxi, you must take me out for a spin...I love the combination of a BG with a V6 engine...and as I'll be on the right hand side, it will feel like I'm driving it :lol:

**Posted:** Mon Aug 18, 2014 9:43 pm

I have put in some extra free days from work for 'if all fails'

It is not going to fail MOT , period!

**Posted:** Tue Aug 19, 2014 2:48 pm

Marc S wrote:

Sod the wedding taxi, you must take me out for a spin...I love the combination of a BG with a V6 engine...and as I'll be on the right hand side, it will feel like I'm driving it :lol:

Sure no problem! :lol:

**Posted:** Tue Aug 19, 2014 2:50 pm

barreljan wrote:

I have put in some extra free days from work for 'if all fails'

It is not going to fail MOT , period!

We have a small window of time, its a tight squeeze but we will get it there!

cant wait to gun this machine down the high way toward the BUTT to the UK

**Posted:** Thu Aug 21, 2014 1:00 pm

MOT Time,

It is not nice to drive, lot of noises, way to bouncy and stiff...
so up for sale :lol:

NOT, I hope that the MOT mechanic will approve it. We discovered a faulty lambda connector so that need to be fixed, that will be done by the MOT-mechanic so I can focus on my house and cleaning up the work shop.

fingers crossed...

**Posted:** Thu Aug 21, 2014 1:05 pm

fingers crossed for you mate

**Posted:** Thu Aug 21, 2014 3:59 pm

Its real nice a bigger engine, but due to the quick work we had to use the materials we had in the shop and never replace with decent stuff. So plans are after JAE to overhaul the car completely and make it better that before.

A bit neglected I can say, So that needs to be changed

#making-a-wish-list

**Posted:** Mon Aug 25, 2014 7:40 am

Soo

still no MOT Because :

Wheel bearing left side
Window washers front (forgot to replace :oops:

)
Emissions...

To this evening BJ will try to sort out the emissions, it is a faulty oxygen sensor, well the wiring of it in the main loom :doubt:

tomorrow I will replace the wheel bearing and than we give it another go..

work to do..

House is pretty coming along, floor is in, sealing is done now waiting for my father-in-law to paint the walls...
Baby room is nearly done, few bits and pieces curtains and a small thing to paint.

**Posted:** Wed Aug 27, 2014 3:02 pm

YESSSS ~!!@ :alien:

Passed on MOT!! mucho grassias to my friend Jeroen who is MOT technician. A very honest guy because he let his colleague do the MOT check. So everything is good and fine!

Now get that Frankenstein-vehicle back in the shop for last preps. Cosmetic thingies and unicorn farts.

**Posted:** Wed Aug 27, 2014 4:27 pm

Great news mate

**Posted:** Wed Aug 27, 2014 5:27 pm

Nice!

**Posted:** Fri Sep 05, 2014 11:29 am

Good work on both counts Adri :thumbright:

Welcome to the world of nappies :laughing6:

See you tonight mate :-D

**Posted:** Tue Sep 15, 2015 7:43 am

Well! We survived another JAE! it was really awesome! Met new people, get to know some of you better and had a really good time

I thought it was time to introduce the daily mule I brought to JAE.

It is a mule, really it is, I use it for all the necessary jobs around the house. And to go to work , I have used it also to travel for holidays.... haha :lol:

It has seen The Netherlands, Germany, Austria, Italy and now also the UK! It isn't looking that good, but it is pretty reliable.

A stock 1.6 16v somewhere there should be 90ps in it :lol:

it is quite swift

K-sport coilovers,
Laser Deeptone exhaust with a deleted midbox,
Renault Safrané sideskirts,
17" wheels,
Tined windows,
Recaro ergo seat,
2Sony Explod speakers and a closed sunroof...

That sunroof is one pain in the bottom, it isn't that pretty fixed but it is closed and I'm now dry

I wont spent to much time on it because is simply don't have the time for it and I have the V6r as well which I will rebuild first.
That one will be painted, welded and modified :badgrin:

Thank you guys for the hospitality and the warm family vibe there !

**Posted:** Mon Feb 20, 2017 2:48 pm

This has been to long here at the bottom of page 6 show your car?

i'm not sure to tell you guys what i'm working on with the green BG...
:lol:

**Posted:** Mon Feb 20, 2017 4:36 pm

Hellracer wrote:

This has been to long here at the bottom of page 6 show your car?

i'm not sure to tell you guys what i'm working on with the green BG...
:lol:

Don't tell us, show us! :drunken:

**Posted:** Tue Feb 21, 2017 11:12 am

This, is just a small part off what im working on

**Posted:** Tue Feb 21, 2017 8:06 pm

**Posted:** Wed Feb 22, 2017 9:11 am

You going to be coming to JAE in the beast this year Adri?

**Posted:** Wed Feb 22, 2017 9:43 am

probably in stock conditions...not sure though, my new house will be ready that time aswell....
and this project is something what takes quite allot time :drunken: