Camber kit already installed !!

Now i have ordered some stickers from Stance|Works, CD player goes for a repair ...

Nice, would like to see some more pictures of it!

Final about suspension.. for now



Now its time to fix that rust .. :X

hi
can you tell me what kind of camber kit did you installed? i need to do some also but i don't know how(except camber bolts maybe)

this is my ''problem''

I don't know what our colleague did on his F but for me that's freaking low for our roads...
Don't buy stupid camber bolts..
Buy 2 bolts 10mm wide and 70mm long with wider head or just buy washers and replace the upper bolt that holds the shocks to the knukles.. loosen the lower so you can push the top of the knukles in and tighten all the bolts.. MAKE SURE THAT THE 10mm BOLTS THAT YOU BUY ARE WITH MINIMUM 9.8 STRENGT!!
And that the nut is self securing! Not with plastic!!
I will do that today with my F and will show pfotos later..

Best and free method is this, but do this on upper hole:



another pic for preview:

As simple as that, great! And how do the mounts on the strut towers handle the change? Would that work in front too?

It works infront too, but you shortened the life of the top mount.. also the tire wear is uuughh..

I bet you go through a set of tyres every week with that camber haha!

A set for summer time yes, my friend do this every year
after that the tyres don't look like tyres anymore

sixth month with same tyres ^^

by the way today i ordered new CD player. tommorow pics of cd and new white/red dashboard

Just buy simetric tyres and flip them over after one season, the outside will stay like new since it is in the air :D

Personally I would just use Camber bolts instead of removing material from the struts but it works

There was a guy in a Honda civic on track with us at Japfest this year with about the same amount of camber as that......he span out trying to follow me around the corner at speed and I beleive he span out a few more times after that.

Form > Function, what else to say

Anyone know something about dash repalcement with one from mx3.
Will fit, any hints, tips and more ?
I mean like this:

in BG it fits Plug & Play but in BA? I don't think so

Some new updates:
New rims color, and ordered new tyres for front rims.
I will try put 175/50/16 at those 8j, wish me good luck


In 2-3 days i will post pics with new tyres and fitment. cya later

Sooo here is the news..
My old F was sold to a friend..

So i bought a new one. This time 2.0 KF engine. Same color, automatic gearbox.
I will make it project car again of course!
Here is some pics of new F:

Another good looking one. Good luck with the project and keep us updated

Hi there with new updates!
Installed set of halogens, and orange indicators.


Bought new rims with a lot of good dimensions: DZ 1 Exclusiv 17" 8.5J ET15
Soo its polishing and refreshing time also. Here for test tyres is 195/45/17 but i prefer 195/40 :O


Other gifts for my love is coilovers. Ill use from Golf mk2 cuz its a lot more cheaper than mazdas one.. [a hint from a friend]




There some knocking sound in engine after oil changing.. baaad news.. its time to rebuild engine..

Love the log axle stands, well ghetto

What's the process getting those golf coilovers to fit, I like that if it works, alot!

Hello again, guys!

Front coilovers done, all is perfect! I bought yellow tint for fog lights, but no time to make them.. now im mostly work on engine.. need to repair this.

Some updates: Red tinted rear lights


Bought new exhaust tip: Remus


Rims 70% finished.. Need only 2500 an than finally wax..

My room full of project stuff lol

Sorry for i didnt posted anything last time. I was in a break for a while. Now im back:
Installed Golf MK3 coils and the rims. 0.7cm from ground lol.. Soon a lot new mods guys