ok so heres the deal im going to turbo my v6 and price is not an problem
im going to order the manifold from jeroentje but now i need some other supplies

so heres the shopping list
-Intercooler (best one to suit this car)
-Turbo
-ECU
-Forged Pistons

If you now were the best place to get these are please let me know
and if there is anything ive missed let me know

also has anyone done this to a type X

Pistons may be a difficult purchase but the item below has most of the stuff you need. No one in the UK has turbo'd a V6 to my knowledge. Apparently people in the states use conrods from a 2.0 16v V-Tec (HRV's I think) as they are stronger.

Management unit would be something like a Megasquirt (full standalone) or Apexi NEO2 FR (which can take a map sensor)

You might need a couple of other bits but this should be about all you need.

-Godspeed TYPE-L INTERCOOLER (20X9X2.75" CORE SIZE) overall length 28"

-t3/t4 stage 3 turbo

- blow off valve

-fuel regulator

- wastegate

-oil return line with fitting

-universal 2.5" aluminum intercooler piping with silicone & t clamps

-5 bolt stainless downpipe

http://cgi.ebay.com/ebaymotors/93-97-FO ... ccessories

www.importperformanceparts.net you can order all that you need, including h beam conrods, forged low compression wiseco pistons, turbo, injectors, fpr, ems and all the other bits you need.
The only exception would be the exhaust manifold, but jeroentje has that one for you.
Make sure you get new beatings as well which are one size bigger. Recut your cranckshaft for best results. Do get a new lightweight flywheel and clutch and a new oilpump. Uprated timingbelt is a plus too. All of this is a lot of money!

And your in NZ which in home of LINK ecu which are very interesting!!

Dont forget a decent fuel pump, not sure what the v6 has but im sure it wouldnt be up to the job! walbro are good

and a good price!

awesom guys thanks

would it be a twin turbo? or like the vectra v6 turbo and just have one?
if im right the 2.5 can be twin turbo charged.

i think someone has probably turb0'ed a v6, just not in a 323f, see a few turb0 probes on rocs forum thingy, never checked their location though

similar engine, maybe a good idea to ask over there for parts?

Howsit maaate!!!
glad Ive seen your thread- U could be a man I want to know.
Im in auckland and have dropped a klze in2 my type R- and I had a type X before too. tho shes long gone now.
Been thinking about the turbo conversoin but its always seemed like too much money, more than I can willingly part with anyway.
Look forward to watching your progress mate

Oh, and just to clarify- are u turboing a standard type X or a klze typeX??

New Zealand sounds like a haven of ace cars and cheap insurance!



And Busch Wildlife Gardens.

apparently we have some of the most relaxed car laws around.
for example- whats an emmisions test?? never had one of those
and- no testing officer has ever noticed I dont have the standard 2 litre engine
its O 4 Awesome over here

http://www.youtube.com/user/mk3miniturb ... HA1jiKAMKM

Asked him to join the forum but no response. Not a great video but sounds sweet.

Jeroentje have a turbocharged KLZE mx3