i recently got a turbo from a friend from a rb25
not sure which turbo it is i know a custom exhaust manifold has to be fabricated.
also i have a 1.6 l engine
i want to know if i can use this turbo and what i need to get
thanks

you can try.....
u need to get a lot:
manifold,
downpipe,
injectors,
oil feeds,
ecu an wiring.

skyline turbo is MUCH too big. doubt weather it'll actually fit between rad and block.

give it a go ad let us all know though.

manifold and downpipe not a problem
my dad has a fabrication company
what size injectors can work
what is oil feed for
which ecu to get

not sure on the injector size..
but the oil from the sump on a new line to lube the turbo!
and ecu's for the BA arent mappable so you need a mappable performance one..
have a google on custom turbo fabrications?

[quote="lewp91"]not sure on the injector size..
but the oil from the sump on a new line to lube the turbo!
and ecu's for the BA arent mappable so you need a mappable performance one..
have a google on custom turbo fabrications?[/quote]

i was told i only need bigger injectors and a fuel pressure regulator and a biger fuel pump
not a new ecu

When you say you have a 1.6 litre engine, do you mean in the car, or to go in the car?

The ECU is not a learning one, and will therefore only fuel/time the engine to preset factory settings. Throwing a turbo in without a proper fuelling set up will cause not nice things to happen.

Ah, sorry..... just noticed your from Trinidad, hence the 1.6 engine.

Your engine comes with a turbo in the BF 323 GTX, so therefore all the fuel and ECU stuff will already be readily available from somewhere. Best bet would be the American Protege market.

thanks man
so i can get an ecu to use
what to search for

Search for B6T engine.
Or 86 to 89 323 GTX.