BA - da2el 323F'96 - picture warning page 6 and 8

**Posted:** Sun Dec 09, 2007 11:14 pm

Vibration
The tyres may need balanced. Do the wheels have any small weights on them?
Nice mods so far though, its coming along nicely. :thumbleft:

**Posted:** Mon Dec 10, 2007 2:44 am

haha now u after a set of springs icic not going to me much a normal F no more now is it??

keep up the gud work!

**Posted:** Mon Dec 10, 2007 10:10 am

Neil F wrote:

Vibration
The tyres may need balanced. Do the wheels have any small weights on them?
Nice mods so far though, its coming along nicely. :thumbleft:

yes they have...many small weights (in one of the wheels could be 10)
the wheels need to be fixed or is a tyre problem?

**Posted:** Mon Dec 10, 2007 10:13 am

Lantis wrote:

haha now u after a set of springs icic not going to me much a normal F no more now is it??

keep up the gud work!

you don't even see the springs in a normal view :lol:

it will have the same simple appearenc

**Posted:** Mon Dec 10, 2007 1:16 pm

If the fitment of the wheels was correct for the car (PCD: 4x100, et35-42, CB 54.4), then the vibration will probably be balancing, alignment etc. Also, like you say, watch the tyre pressues.

If the profile of the tyres is lower than on your previous wheels then the harshness of the ride is to be expected :thumbright:

Otherwise, get some pics up of the 4x4

Good work

**Posted:** Mon Dec 10, 2007 1:35 pm

as I've seen on portuguese foruns is stupid to fit new wheels and not balance them :shame:
I'll try to do it asap but they allready have so many weights maybe they need fix

**Posted:** Sun Dec 16, 2007 10:15 pm

here is the only picture where the machine managed to open the eye and turn on the flash at the same time... (the others are all all black)

at the moment I ride on the black wheels because the new ones go on fix
and how good it run on R13 but they're so ugly poor wheels

**Posted:** Mon Dec 17, 2007 7:40 am

Dude.....ive decided you're a legend!

You have a really nice example of a clean BA...and your just adding the odd little bit here and there to personalise and improve.

Plus....do we really need to remind you how much you were against modding the cars at first......

You're well and truly a welcome part of the club now fella :thumbright:

**Posted:** Mon Dec 17, 2007 10:56 am

thanks

modding yes but letting always the allready nice style of the 323F

at the exterior just lefts for me a little lowering and maybe a laguna lip because ZXi lip in portugal is not easy to find and no more kits
I possible would have crystal side repeaters If there was crystal rear repeaters too

more pictures to come when the wheels are back

**Posted:** Mon Dec 17, 2007 5:42 pm

You could order the ZXi lip from mazda. I asked the mazda dealer near mine and they said splitters are £145 (203.355 EUR) and are part# BC5S519K0 and are unpainted. Perhaps you could order one from there or ask someone in UK to order it for you then post on.

If you're that interested.

**Posted:** Mon Dec 17, 2007 6:27 pm

Dazel.... You are indeed a legend of the forum :cheers:

I would like to have sexual occasions with your vehicle - it is very nice :thumbleft:

**Posted:** Mon Dec 17, 2007 7:09 pm

TheRealMobiius wrote:

You could order the ZXi lip from mazda. I asked the mazda dealer near mine and they said splitters are £145 (203.355 EUR) and are part# BC5S519K0 and are unpainted. Perhaps you could order one from there or ask someone in UK to order it for you then post on.

If you're that interested.

I'll think on that because is not for now
don't know about england but for our money incomings 200euros is too many euros for a piece of plastic so I thounght in the laguna lip because is easy to find in the scrappies

**Posted:** Mon Dec 17, 2007 7:10 pm

Lankybob wrote:

Dazel.... You are indeed a legend of the forum :cheers:

I would like to have sexual occasions with your vehicle - it is very nice :thumbleft:

thanks again
you almost scarry me till I read the part "with your vehicle"

**Posted:** Tue Dec 18, 2007 9:28 am

da2el wrote:

Lankybob wrote:

Dazel.... You are indeed a legend of the forum :cheers:

I would like to have sexual occasions with your vehicle - it is very nice :thumbleft:

thanks again
you almost scarry me till I read the part "with your vehicle"

Its still scary even once you do read the last part :lol:

**Posted:** Sun Dec 23, 2007 12:46 am

New pictures

**Posted:** Sun Dec 23, 2007 7:22 am

Stunning pictures mate.....she's looking mighty fine there :thumbright:

**Posted:** Sun Dec 23, 2007 8:15 am

I much preferred it when it was stock :evil4:

No, seriously, it looks very very nice, it's coming along a treat.

What have you got planned next da2el?

**Posted:** Sun Dec 23, 2007 8:33 am

Very better

**Posted:** Sun Dec 23, 2007 1:26 pm

_MoReNo88_ wrote:

Very better

much better moreno :lol:

**Posted:** Sun Dec 23, 2007 1:33 pm

funny I don't remember it was snowing when I take the pictures :lol:

well the next thing is to fix one of the wheels (as I've said on the BA wheels section) and also fix the left transmission "fole" (is that rubber thing behind the disc brake)

in the future a little lowering and I was also thinking in that AA thing (is there a mazda/mazdaspeed brand one?)

**Posted:** Sun Dec 23, 2007 1:34 pm

da2el wrote:

_MoReNo88_ wrote:

Very better

much better moreno :lol:

(não dá para escrever também assim? tenho a impressão que já vi assim escrito!) :oops:

**Posted:** Sun Dec 23, 2007 2:36 pm

_MoReNo88_ wrote:

da2el wrote:

_MoReNo88_ wrote:

Very better

much better moreno :lol:

(não dá para escrever também assim? tenho a impressão que já vi assim escrito!) :oops:

eu acho que não :lol:

não me lembro de ter visto assim escrito

**Posted:** Tue Dec 25, 2007 11:57 pm

today with the rain I understood why V6 have small body kits on the wheel arches
much sand jump and makes noise when using wider tyres

**Posted:** Wed Dec 26, 2007 10:31 am

nice pics man!

**Posted:** Wed Dec 26, 2007 1:50 pm

CV joint to change next year
man I'm so f*cked

**Posted:** Wed Dec 26, 2007 10:17 pm

Looking Sweet ;-)

**Posted:** Thu Dec 27, 2007 3:57 am

not so standard now then

, jus joking. The wheels look nice & smart, really changes the cars look, if there is one last mod you ever do.....LOWER IT

.

Kash

**Posted:** Wed Jan 02, 2008 1:47 pm

about the CV joint they told me that had to look on my specific joint because the number of "teeth" on the end of the joint can be diferent

are there diferent joints for the BA?
do you now the number of "teeth" BA CV joint have so they can allready buy it?

**Posted:** Sat Jan 12, 2008 11:00 pm

at this moment I've got my car as I wanted it and nothing waiting for attention

now where can I start to invent? I've got some ideas for a to do list:
- front struct bar (that one on the engine)
- new suspension a little lowered
- clear fogs
- licence plate support
- cd player or cd box
- hood paint
- ...

**Posted:** Sun Jan 13, 2008 1:22 am

the most important thing is lowering

, need to get rid of that wheel arch gap, apart from that its very nice and tidy!

Forum rules - Please read!

BA - da2el 323F'96 - picture warning page 6 and 8

Who is online