What did you buy for your car today?

**Posted:** Fri Aug 28, 2015 12:20 pm

Today the postman brought me this ....

[img]http://i1372.photobucket.com/albums/ag349/sfjwebcomms/Car/DSCN6384.jpg[/img]

... and inside that, was this!

[img]http://i1372.photobucket.com/albums/ag349/sfjwebcomms/Car/DSCN6386.jpg[/img]

[img]http://i1372.photobucket.com/albums/ag349/sfjwebcomms/Car/DSCN6385.jpg[/img]

A proper spoiler light, made specifically for a pre-Ford spoiler on a 323F/Lantis/Astina. Bought from a company in the US but the label says "Made in Taiwan", so this thing is pretty well-travelled already.

And yes, it fits the recess perfectly. The only hitch might be getting the wire through the single fixing hole in the boot lid ... but I'll cross that bridge when I come to it.

Really looking forward to getting this on the car - I'll try to fit it to the spoiler in time for JAE, though I'll need a hand wiring it up.

S

**Posted:** Fri Aug 28, 2015 1:04 pm

hollow stud for the central fixing, thread it into the spoiler, run the cable through it, and secure with a nut on the other end...give me the rough sizes and I'll see if I have one that will fit

**Posted:** Fri Aug 28, 2015 3:18 pm

**Posted:** Sun Aug 30, 2015 7:30 pm

Today i bought 45ltr of petrol for my F.. fill it to the top..
And burn it all along with 2 shity tyres :badgrin:

**Posted:** Sun Aug 30, 2015 8:27 pm

[quote="Marc S"]hollow stud for the central fixing, thread it into the spoiler, run the cable through it, and secure with a nut on the other end...give me the rough sizes and I'll see if I have one that will fit

[/quote]

Thanks Marc, I'll get you the hole sizes this week when I take the masking off the back of the spoiler and tailgate. But I can't completely visualise how the stud would be fitted.

To clarify/confirm, here's a diagram of what I have:

[img]http://i1372.photobucket.com/albums/ag349/sfjwebcomms/Car/DSCN6393.jpg[/img]

The central spoiler fixing screw on my BA comes up through the underside of the screw hole in the tailgate and up into the screw hole in the central spoiler foot. Normally there would be a second hole in the tailgate matching the cable hole in the spoiler, to channel the stoplight cable down into the boot. But on Sundance that second tailgate hole isn't there, so somehow I have to get the cable down through the screw hole, alongside the screw.

Are we on the same page, so to speak?

S

**Posted:** Mon Aug 31, 2015 10:59 am

Ah I see.

Drill a hole for the cable, it will always be covered, even when using the standard spoiler

**Posted:** Mon Aug 31, 2015 4:42 pm

[quote="Marc S"]Ah I see.

Drill a hole for the cable, it will always be covered, even when using the standard spoiler

[/quote]

Even better: I've decided not to bother replacing the screw in the centre foot, and simply use the two on each outer edge (they're pretty beefy, the spoiler isn't going anywhere). Then use the existing hole for the cable

S

**Posted:** Thu Sep 10, 2015 8:20 pm

Today i bought stock 55-56mm throttle body from 626 2.0l petrol and aaalmoust fit it to my Ba's 1.5 :lol:

need more tweaking with it..
I played around with the attachment holes and at the end of the day i put it on the car just to se if it fits.. here is a pic of the old and new one..

[img]http://i.imgur.com/r6YYKTK.jpg[/img]

still using the 50mm one as i need to find the right way to connect the idlle valve.. TPS match perfectly..

The next step is to bore it out to 62mm where is the limit of the TB..

**Posted:** Sun Sep 13, 2015 8:28 pm

Bought deep 19mm insert so i can fit the new nuts in place..
:roll:

**Posted:** Sun Sep 13, 2015 9:14 pm

Please re size your pics

**Posted:** Fri Sep 25, 2015 8:52 pm

a brand new set of shiney wheel nuts, slim fits as the new wheels are just too small for my nuts hahahaha :roll:

**Posted:** Fri Sep 25, 2015 9:03 pm

Two new tyres for front, went for Toyo Proxes T1R,s.

**Posted:** Wed Apr 06, 2016 10:02 am

New rocker cover gasket and some sealant, as the old (18 year old!!) gasket is now leaking. I was going to wait until I changed the timing belt (my next massive challenge as I'm still the newb mechanic), but God knows when I'll get that scheduled, and the gaskets are only a fiver - I can always do it again at the time.

Will be changing the dizzy O-ring at the same time, and replacing the existing rocker cover with the nice red one Lerch gave me a while back.

S

**Posted:** Wed Apr 06, 2016 10:18 am

[quote="SerenaJ"]Will be changing the dizzy O-ring at the same time, and replacing the existing rocker cover with the nice red one Lerch gave me a while back.

S[/quote]
Nice Serena! look forward to seeing the results!

**Posted:** Sun May 01, 2016 2:09 am

I did nothing!

But I did, painfully, go and buy some supplies for my next project

**Posted:** Sun May 01, 2016 8:23 am

MPS front calipers rebuild kit purchased in the week and arrived Thursday whoop!

**Posted:** Sun May 01, 2016 10:07 am

2.5" cat to go with the stainless headers. 2.5" build your own exhaust kit. 2 new o2 sensors. pcv valve, piston rings, cylinder hone, head gasket set. its been expensive to say the least

**Posted:** Mon Jun 06, 2016 12:52 pm

Brand new replacement radiator from Amazon(!!!) for £9.57, plus 48hr delivery for £8 :shock:

It's only the NRF one, but for £18 I'm not complaining: in the short term it keeps me on the road. When cashflow is a bit better I can always splash out on a Hella, or whatever.

Local Mazda dealer quoted £138.89 + VAT, and offered a free ticket to their comedy night.

S

**Posted:** Mon Jun 06, 2016 1:08 pm

Gee whiz what's my tally to date over 4 weeks of ownership ?

OEM CD player
Roof Racks
10L of oil + 2 filters + filter wrench for next 2 changes
Timing belt/pump kit
Car mats
Body kit
Coilovers
Extractors
Ribbed tappet cover
5 sets of mags (lol)
Volk wheel nuts
Backlit gauge cluster
HID's
'Spare" bonnet

and a partridge in a pear tree...

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

**Posted:** Mon Jun 06, 2016 1:16 pm

[quote="MadazInBris"]and a partridge in a pear tree...

[/quote]

... and you'll want to get some of those bird-mess wipes, in case the partridge dirties your paintwork

Looking forward to seeing some photos of this lot, post-assembly!

S

**Posted:** Mon Jun 06, 2016 1:25 pm

Just don't expect pics of all 5 sets of mags all on at the same time !

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

**Posted:** Tue Jun 07, 2016 7:36 am

Oh and the (as new 18klm's) steering rack !
I've lost track about my expenditure :lol:

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

**Posted:** Tue Jun 07, 2016 8:44 am

[quote="SerenaJ"][quote="MadazInBris"]and a partridge in a pear tree...

[/quote]

... and you'll want to get some of those bird-mess wipes, in case the partridge dirties your paintwork

[/quote]

[img]http://rx8ownersclub.co.uk/forum/images/smilies/carwash.gif[/img] :lol:

**Posted:** Wed Jun 15, 2016 1:27 am

[img]https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/rAIAAOSwuhhXVS9T/$_20.JPG[/img]

[img]https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/QLgAAOSwnFZXVS9T/$_20.JPG[/img]

taaaaa daaaaa !
$130 shipped to my front door
:shock:

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

**Posted:** Mon Jun 20, 2016 3:50 am

Even tho' my minty mint fresh as a daisy "Asty" has been very well cared for
I'm not exactly certain just what has been done during her later years,
so today some "top o' da lyne" full synth gearbox oil will go in
(you do know it needs replacing after 60K or 40k miles yeah ?)
& some super excellent [color=#BF0000]SPLITFIRE[/color] plugs :shock:

Aussie made Penrite Oil = $40.30 AUD
U.S.A made Plugs = $52 AUD
K&N panel filter ordered = $92 AUD

[img]https://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/BlgAAOSwOVpXZ1uR/$_20.JPG[/img]
[img]https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/wYoAAOSwNuxXZ1vB/$_20.JPG[/img]

Now just need to fit a 1940's V-16 Rolls Royce aero motor ! :lol:

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

**Posted:** Wed Jun 22, 2016 5:50 am

[img]http://memedad.com/memes/911623.jpg[/img]

**Posted:** Thu Jun 23, 2016 7:26 am

Dunno if I'll get to using it but daaaaaayum it sure iz purty ! :lol:

Universal twin tip stainless muffler 3 1/2" tips !! - 2 1/2 inlet pipe :shock:

$30 ozzie buckeroonie pesos

Can be fitted with tips up - So bokuz JDM style :bootyshake:

Or tips down - Old school cool :headbang:

[img]https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/0QcAAOSwNuxXa3zl/$_20.JPG[/img]
[img]https://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/MQYAAOSwnNBXa31H/$_20.JPG[/img]
[img]https://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/vHEAAOSw-4BXa32A/$_20.JPG[/img]
[img]https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/weQAAOSw-4BXa33A/$_20.JPG[/img]
[img]https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/Sz8AAOSwnNBXa363/$_20.JPG[/img]

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

**Posted:** Sat Jun 25, 2016 12:46 am

Small mesh nylon fish pond netting to fix behind the bumper, to protect the new rad from stones and flies.

I could probably do with something stronger, but this will have to do for the moment.

S

**Posted:** Sat Jun 25, 2016 2:35 pm

New Ctek MXS4.0 8-stage Charger from Repco for the 323's mothballing....

Any Aussies out there should get 'em whilst they are available, they are close to 50% off ($99 instead of $180) and have selections for mçycle, car and Calcium batteries. It also has a 'rejuvenation' and anti-sulphation modes so if it saves you an old battery or two for a year or two it'll have paid for itself.

[b]Patrick[/b]

**Posted:** Sat Jun 25, 2016 3:03 pm

If at all possible Serena, get an old flyscreen alloy frame & cut it to fit in front of the rad.
That way you can have a gap & some leeway in flex, for big bugs & stones :idea:

_________________________________________________________________
Speed is subjective to only how far you keep your right foot down..

What did you buy for your car today?

Who is online