| Club323F http://www.club323f.com/forum/ |
|
| BA - Breaking 323F ZXI SE . 1 week or so left ** pics *** http://www.club323f.com/forum/viewtopic.php?f=69&t=55253 |
Page 1 of 2 |
| Author: | Dale [ Thu May 09, 2013 4:19 pm ] |
| Post subject: | BA - Breaking 323F ZXI SE . 1 week or so left ** pics *** |
Hi guys I'm breaking a 1998 ZXI SE with 69k on the clock. I'm picking the car up tonight. The car was T-Boned and has been written off. The damaged parts are the N/S doors and wing, the rest of the car is in good shape. The car has had 2 previous owners (both women) the first having it for around 10 years then the second having it for 7 months prior to the accident and it has been sitting in a garage for the last 4 years. I will be taking the engine out of it for myself but the rest of the car is available including the cream leather interior which is up for grabs. Car is located in Irvine, Ayrshire, KA12 Ill will post a few picks up from all angles, inside and out when I get back from picking it up tonight. Ill be starting to strip it down at weekend, so if your wanting any parts let me know and Ill take them off and put them aside for you. ![]() ![]() ![]() ![]() Cheers guys
|
|
| Author: | marcdh [ Thu May 09, 2013 5:40 pm ] |
| Post subject: | Re: BA - 323F ZXI SE |
Hey price for rear wheel bearing please
|
|
| Author: | triplezoom [ Sun May 12, 2013 12:16 am ] |
| Post subject: | Re: BA - 323F ZXI SE ... Pictures |
Hi there mate, I'm looking for 4 wheels knuckles/hubs and the metal disks protections from a mazda 323F/astina/lantis 2.0L v6 gt/zxi, knuckles/hubs need to be for ABS version and of course in good working condition. Shipping will be to Belgium, let me know your price ! Cheers ! |
|
| Author: | Dale [ Sun May 12, 2013 2:21 am ] |
| Post subject: | Re: BA - 323F ZXI SE ... Pictures |
triplezoom wrote: Hi there mate, I'm looking for 4 wheels knuckles/hubs and the metal disks protections from a mazda 323F/astina/lantis 2.0L v6 gt/zxi, knuckles/hubs need to be for ABS version and of course in good working condition. Shipping will be to Belgium, let me know your price ! Cheers ! PMd
|
|
| Author: | kieranv6 [ Sun May 12, 2013 7:48 am ] |
| Post subject: | Re: BA - 323F ZXI SE ... Pictures |
Passenger side front fog please. ? |
|
| Author: | Dale [ Sun May 12, 2013 12:05 pm ] |
| Post subject: | Re: BA - 323F ZXI SE ... Pictures |
kieranv6 wrote: Passenger side front fog please. ? PMd |
|
| Author: | Dale [ Fri May 17, 2013 1:18 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Still breaking |
|
| Author: | $uPaFLy V6 [ Sun May 19, 2013 5:41 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
benidormdale, How much for the front splitter mate and does it come with clips? |
|
| Author: | yassinkara [ Mon May 20, 2013 10:37 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Hi, how much for the interior (seats only) delivered? |
|
| Author: | triplezoom [ Mon May 20, 2013 10:48 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Payment done just right now for the 4 wheels knuckles, hubs with disk shield and abs sensors woohoo ! Dale is a really nice guy ! Can't wait ! cheers mate ! |
|
| Author: | Dale [ Mon May 20, 2013 8:09 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
yassinkara wrote: Hi, how much for the interior (seats only) delivered? PMd. Triplezoom. Your welcome mate.
|
|
| Author: | marcdh [ Mon May 20, 2013 10:53 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Is it wheel bearing / hub time yet?
|
|
| Author: | HMT [ Wed May 29, 2013 11:38 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Would be interested in the rear mud guards
|
|
| Author: | Dale [ Wed May 29, 2013 12:16 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
HMT wrote: Would be interested in the rear mud guards ![]() PMd |
|
| Author: | triplezoom [ Thu May 30, 2013 7:12 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Hi all, Just a little feedback for say that Dale is the best seller i've ever met ! He's responding very quick always, made pictures of the parts before, he have one word and parts were like described (fast dismandling and fast shipping with tracking number and pictures of the parts removed and boxed ! ). You can buy with confidence ! he's highly recommended ! Many thanks Dale ! |
|
| Author: | Gadgie [ Thu May 30, 2013 8:54 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Aye! its good when you deal with someone like that, gives you a nice feeling, Eh!
|
|
| Author: | triplezoom [ Thu May 30, 2013 10:51 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Hi mate ! Yep that's why he deserve to get somes good feedbacks It's part of the forum too, share the bad and the good experiences, here's it' was perfect so i need to tell it too when somethings goes very well ! Cheers ! |
|
| Author: | Double R [ Fri Jun 07, 2013 12:01 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
How much for the tailgate (bare,i don't need the brake light,spoiler or rear reflective bit) |
|
| Author: | Dale [ Fri Jun 07, 2013 12:10 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Pmd |
|
| Author: | sneakz [ Fri Jun 07, 2013 12:14 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Can confirm as said above. Genuinely nice guy and indeed quick also with postage. Just bought the interior of him and previously did some trading of fogs and reverse UK for eu ones.
|
|
| Author: | Dale [ Fri Jun 07, 2013 12:23 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
sneakz wrote: Can confirm as said above. Genuinely nice guy and indeed quick also with postage. Just bought the interior of him and previously did some trading of fogs and reverse UK for eu ones. ![]() Cheers mate and the same to you.
|
|
| Author: | Dale [ Sat Jun 08, 2013 1:59 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE ... Pictures |
Ok guys, this BA is almost ready for the scrap heap shame as it was a mint car apart from the damage.Engine is planned to get taken out over weekend and going in Lexi. It is basiclly a shell now. Things not dismantled so far are. Doors ×3 as front passenger one is damaged Bonnet Sunroof Carpet in mint condition , tho i might keep this for myself Seat belt parts Interior trim parts ECU and wiring loom Roof lining And other shell bits and bobs. The car should be taking carpark in the sky next week so if anyone wants anything get in touch. Im letting these parts go a low prices and if some dont sell ill use them to replace some parts of Lexi ie; trim parts , door rubber seals etc,,, I have taken most parts off the car and are for sale in for sale section so please refere to there if you are interested in those parts. Mods,, this is not a Bump but just an update on whats left and to let others know that the car will be around for another week. Thanks to a that have bought parts and who have taken an intetest. ![]() Here is a few pics of how she sits today ![]() ![]() I hate seeing a BA in this state
|
|
| Author: | eogbaker [ Sat Jun 08, 2013 3:08 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
If you can get the main big groumet the is in the firewall that the ecu harness runs through out in one piece I will definitely be wanting it as have buggered Mine completely |
|
| Author: | Dale [ Sat Jun 08, 2013 3:49 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
eogbaker wrote: If you can get the main big groumet the is in the firewall that the ecu harness runs through out in one piece I will definitely be wanting it as have buggered Mine completely Sorted mate when the engine comes out. It will be popped in the post to ya , just give me your address.
|
|
| Author: | Sloth [ Sat Jun 08, 2013 9:37 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
Can you remember the smaller distributor plug for me, if it was this one it was coming off?
|
|
| Author: | Dale [ Sat Jun 08, 2013 11:28 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
Sloth wrote: Can you remember the smaller distributor plug for me, if it was this one it was coming off? ![]() No worries mate. I disconnected all the wiring and pipes today. Pm me your address and ill send it on monday. Ill take a pic of it tomorrow to make sure its tge right one
|
|
| Author: | Tinnyuk [ Sun Jun 09, 2013 1:21 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
My front windows have pretty bad scratches so if these ones are good then I'd be really interested. Wish I found this forum earlier we were at the beach in Ayr with the kids last weekend! Justyn |
|
| Author: | Double R [ Wed Jun 12, 2013 10:39 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
Pm'd |
|
| Author: | Dale [ Wed Jun 12, 2013 8:00 pm ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
Tinnyuk wrote: My front windows have pretty bad scratches so if these ones are good then I'd be really interested. Wish I found this forum earlier we were at the beach in Ayr with the kids last weekend! Justyn Hi mate the passenger windows us scratchless and the drivers windows has a few but is not that bad. Where abouts are you? Im only 10mins from ayr. |
|
| Author: | winstonlocks [ Thu Jun 27, 2013 9:22 am ] |
| Post subject: | Re: BA - Breaking 323F ZXI SE . 1 week or so left ** pics ** |
would you happen to have the radiator? |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|