| Club323F http://www.club323f.com/forum/ |
|
| zxi http://www.club323f.com/forum/viewtopic.php?f=69&t=52119 |
Page 1 of 2 |
| Author: | MattJones [ Sat Sep 29, 2012 5:30 pm ] |
| Post subject: | zxi |
nearly everything has been taken off my old zxi! its getting taken away tomorrow after i have removed whats left of engine, drive shafts, steering rack and suspension. anything left on the car you require pm me quick as car will be gone by noon tomorrow. many parts have been shelved so lots available. some i will be keeping, some sold and some not.. too many to list so let me know what you want and i will let you know if i have it. rear suspension and whole axle will be taken off car. so if anyone is interested in a rear disc brake conversion let me know. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
|
| Author: | Matt [ Sat Sep 29, 2012 6:27 pm ] |
| Post subject: | Re: zxi |
how much you after for the rear axle mate? |
|
| Author: | eogbaker [ Sat Sep 29, 2012 6:53 pm ] |
| Post subject: | Re: zxi |
how much for the heads and camshafts. Priced seperately |
|
| Author: | mazz [ Sat Sep 29, 2012 9:29 pm ] |
| Post subject: | Re: zxi |
you so have PM! |
|
| Author: | Sylar [ Sun Sep 30, 2012 7:53 am ] |
| Post subject: | Re: zxi |
I need the door weatherstrip that attached to the body, if u willing to ship it to Malaysia. |
|
| Author: | Debz [ Sun Sep 30, 2012 8:54 am ] |
| Post subject: | Re: zxi |
Oh and a price for the steering rack please if possible
|
|
| Author: | MattJones [ Sun Sep 30, 2012 1:50 pm ] |
| Post subject: | Re: zxi |
due to a hangover...again! the car lives for a few more days, until tuesday now, cant be doing with rolling around under it right now .Matt wrote: how much you after for the rear axle mate? im not totaly sure what to ask for it as im keen on keeping the rear shocks. will the shocks from a 1.5 and 1.8 fit this axle? if i sold with the shocks attatched i would be looking to get a fare bit for it all ![]() eogbaker wrote: how much for the heads and camshafts. Priced seperately camshafts £25 set heads £50 each. happy to make me an offer otherwise mate, mazz wrote: you so have PM! replied Sylar wrote: I need the door weatherstrip that attached to the body, if u willing to ship it to Malaysia. can you explain exactly what that is. happy to post to malaysia Debz wrote: Oh and a price for the steering rack please if possible ![]() want £70 for the rack. again this is something im keen on keeping but will sell at riht price. |
|
| Author: | Matt [ Sun Sep 30, 2012 2:07 pm ] |
| Post subject: | Re: zxi |
MattJones wrote: due to a hangover...again! the car lives for a few more days, until tuesday now, cant be doing with rolling around under it right now .Matt wrote: how much you after for the rear axle mate? im not totaly sure what to ask for it as im keen on keeping the rear shocks. will the shocks from a 1.5 and 1.8 fit this axle? if i sold with the shocks attatched i would be looking to get a fare bit for it all ![]() All i want is the rear subframe, with the hub carriers and hubs still attached via the lateral links and with the ABS wiring intact Dont want the shocks or springs at all mate Give me a ball park figure and we can go from there
|
|
| Author: | MattJones [ Sun Sep 30, 2012 2:16 pm ] |
| Post subject: | Re: zxi |
Matt wrote: MattJones wrote: due to a hangover...again! the car lives for a few more days, until tuesday now, cant be doing with rolling around under it right now .Matt wrote: how much you after for the rear axle mate? im not totaly sure what to ask for it as im keen on keeping the rear shocks. will the shocks from a 1.5 and 1.8 fit this axle? if i sold with the shocks attatched i would be looking to get a fare bit for it all ![]() All i want is the rear subframe, with the hub carriers and hubs still attached via the lateral links and with the ABS wiring intact Dont want the shocks or springs at all mate Give me a ball park figure and we can go from there ![]() pm'd you |
|
| Author: | winstonlocks [ Sun Sep 30, 2012 4:39 pm ] |
| Post subject: | Re: zxi |
hi do you still have the section of exaust between the downpipe and the cat? |
|
| Author: | MattJones [ Sun Sep 30, 2012 7:06 pm ] |
| Post subject: | Re: zxi |
no sorry its gone, scrapped along with the cat |
|
| Author: | winstonlocks [ Mon Oct 01, 2012 6:50 am ] |
| Post subject: | Re: zxi |
ok thanks |
|
| Author: | 323F Rock [ Mon Oct 01, 2012 12:27 pm ] |
| Post subject: | Re: zxi |
Did your V6 have ABS? |
|
| Author: | MattJones [ Mon Oct 01, 2012 4:59 pm ] |
| Post subject: | Re: zxi |
323F Rock wrote: Did your V6 have ABS? yes |
|
| Author: | 323F Rock [ Mon Oct 01, 2012 5:02 pm ] |
| Post subject: | Re: zxi |
bugger i need one without!
|
|
| Author: | MattJones [ Tue Oct 02, 2012 7:04 pm ] |
| Post subject: | Re: zxi |
car now gone ![]() rear axle completely removed and for sale to someone whos interested in a rear brake conversion. with abs sensors, brake calipers and hubs attached £70 with standared shocks and springs £120 ![]() bye bye, was unable to rescue gear box, steering rack or sump ![]() ![]() many parts kept so please keep this thread open
|
|
| Author: | MattJones [ Tue Oct 30, 2012 7:51 pm ] |
| Post subject: | Re: zxi |
just to bring to attension again...many parts still available, interior trim wiring looms buttons engine componants sensors |
|
| Author: | eogbaker [ Thu Nov 01, 2012 1:05 am ] |
| Post subject: | Re: zxi |
You still got the engine wiring loom or could you not get it out in one piece |
|
| Author: | MattJones [ Thu Nov 01, 2012 2:17 am ] |
| Post subject: | Re: zxi |
got all except the loom which goes through the bulk head into dash, the ecu loom i believe it is. i bet that loom was the most relevent or sort after part of it
|
|
| Author: | 323F Rock [ Thu Nov 01, 2012 9:45 am ] |
| Post subject: | Re: zxi |
in the wiring manuals its called the emissions loom and connects the ECU to the engine sensors through the bulk head
|
|
| Author: | eogbaker [ Fri Nov 02, 2012 2:26 pm ] |
| Post subject: | Re: zxi |
well it is the one i am after
|
|
| Author: | green? [ Sat Nov 03, 2012 8:16 pm ] |
| Post subject: | Re: zxi |
Hi, do you have a rear wheel bearing? |
|
| Author: | kieranv6 [ Sat Nov 03, 2012 8:19 pm ] |
| Post subject: | Re: zxi |
Rear bumper ? Any marks on it if you have ? |
|
| Author: | MattJones [ Tue Nov 13, 2012 1:31 pm ] |
| Post subject: | Re: zxi |
kieranv6 wrote: Rear bumper ? Any marks on it if you have ? i have a rear bumper yes some marks bub not bad. no dents or creases. |
|
| Author: | MattJones [ Sun Nov 18, 2012 9:08 pm ] |
| Post subject: | Re: zxi |
knockers |
|
| Author: | Dave Mole [ Sun Nov 25, 2012 8:29 pm ] |
| Post subject: | Re: zxi |
Hi, do you still have the radiator? |
|
| Author: | MattJones [ Sun Nov 25, 2012 9:09 pm ] |
| Post subject: | Re: zxi |
radiator is available yes its abit battered and old but works fine and holds water, i dont want much at all for it |
|
| Author: | Dave Mole [ Sun Nov 25, 2012 10:53 pm ] |
| Post subject: | Re: zxi |
how much delivered? |
|
| Author: | theoretic [ Mon Dec 10, 2012 12:50 pm ] |
| Post subject: | Re: zxi |
Hi, do You still have front and rear doors (driver side)? Thanks |
|
| Author: | MattJones [ Wed Dec 26, 2012 1:09 pm ] |
| Post subject: | Re: zxi |
theoretic wrote: Hi, do You still have front and rear doors (driver side)? Thanks i dont sorry |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|