Group Buy - BA - Bonnet Lifters

**Posted:** Thu Oct 15, 2009 5:37 am

Mase wrote:

Khop Kun Krap Tarkoon

Brackets 3mm thick Krap
200mm length Krap
60mm width Krap

Garuna.

Koh Chai Mai?

Price I would expect to be no more than Song Pan Baht including supply and machining of materials as well as shipping. Lets see what you come up with Tarkoon. I say Song Pan because that is how much it cost me to buy and have them sprayed. I machined them myself.

Mate,
Not sure about the dimension you gave, can you write indown on paper and post it. So I can give to shop overhere to give the price. 200mm length seem too long from what i have seen on the picture.

I will do one set for myself but not sure 323f sedan got the same dimension as 323f BA you used. But i will check dimension of fixing point from the same model as you here.

Where did you learn Thai mate?? :lol:

**Posted:** Thu Oct 15, 2009 1:37 pm

Thailand is his second home! :shock:

**Posted:** Sat Oct 17, 2009 12:36 pm

Mase
I went to workshop today and talk to them. The bracket can made from steel or stainless steel. Please send me the sketch and dimension so they can give the cost. More set will be reduce the cost.

**Posted:** Sun Oct 18, 2009 2:36 am

tarkoon, i am trying to sort a deal here with a steel merchant. please wait, if no deal here then, i ill send you template.

**Posted:** Wed Dec 23, 2009 1:54 am

new bracket design

just made these yesterday, yes obviously they will need colour coding but that can be done at another date, the important thing is it works

**Posted:** Wed Dec 23, 2009 6:55 pm

this is my car pictured above, and i can honetly say what a simple mod this is to do. absouletly no problems at all. i waited on this group buy for ages and i have to say kenny has definalty hit on a winner here. im surprised you guys aint been ripping these out out his hands yet.

kenny am waiting on you to come back and colour code them for me. :P

**Posted:** Wed Dec 23, 2009 7:48 pm

We would be snapping his hands off if the brackets didn't need fabricating first mate. We've all been waiting ages on this group buy too, including the 29 people that put their name down before you

**Posted:** Wed Dec 23, 2009 7:55 pm

Kenny, would you be willing to donate the club a pair of brackets? I use a local fabricators quite a bit so I shouldn't have any problems getting a load of sets made up for everyone

**Posted:** Wed Dec 23, 2009 8:38 pm

offshore4ft wrote:

Kenny, would you be willing to donate the club a pair of brackets? I use a local fabricators quite a bit so I shouldn't have any problems getting a load of sets made up for everyone

Hi mate, depends how much it will cost each pair to fabricate, i can fabricate them too for the club if need be, prob cost me around 4.00 for a pair of brackets. Obviously i will be a bit slower if i need to make 29 pairs and being at final yr at uni. I dont mind if you find someone to fabricate them at a cheaper cost all for the clubs benefit :lol:

**Posted:** Wed Dec 23, 2009 9:47 pm

Try this one mates!!

An Dutch fabricater of hoodlifts for the 323F BA: http://www.rjpshop.nl/mzdstyling/produc ... s_id=11608

Cheers

**Posted:** Thu Dec 24, 2009 5:08 pm

Im definately interested in a set!

**Posted:** Thu Dec 24, 2009 8:07 pm

franki323f wrote:

this is my car pictured above, and i can honetly say what a simple mod this is to do. absouletly no problems at all. i waited on this group buy for ages and i have to say kenny has definalty hit on a winner here. im surprised you guys aint been ripping these out out his hands yet.

kenny am waiting on you to come back and colour code them for me. :P

Dont mind colour coding them for u, have to be a summer mod tho :lol:

**Posted:** Thu Dec 24, 2009 8:10 pm

Just place your no. and name down to start the list and the more the better as Ive spoken to the dealer in china, theyre willing to knock down the price if theres over 20 pairs ordered

**Posted:** Fri Dec 25, 2009 10:30 am

There is a list but I guess you want a new list to check who's still interested so I'll start:
1. Paul323f
2.
3.
4.
5.

**Posted:** Fri Dec 25, 2009 5:04 pm

1. Paul323f
2. A L 3 X
3.
4.
5.

I'm a maybe, do you have an idea of price?

**Posted:** Fri Dec 25, 2009 6:41 pm

At a guess, £40-£50. Depends on the price of the brackets and how many people are still interested :thumbright:

**Posted:** Fri Dec 25, 2009 7:37 pm

1. Paul323f
2. A L 3 X
3. Hafizkam
4.
5.

**Posted:** Fri Dec 25, 2009 7:39 pm

1. Paul323f
2. A L 3 X
3. Nick
4.
5.

**Posted:** Fri Dec 25, 2009 8:10 pm

nick wrote:

1. Paul323f
2. A L 3 X
3. Nick
4. Hafizkam
5.

**Posted:** Fri Dec 25, 2009 8:45 pm

offshore4ft wrote:

At a guess, £40-£50. Depends on the price of the brackets and how many people are still interested :thumbright:

Who knows could be cheaper depending on what kind of offer i can get from the dealers. But for now 40-50pounds (dont have pound symbol on my chinese input keyboard lol) Let u guys know asap when i confirm the price

**Posted:** Fri Dec 25, 2009 9:08 pm

i'm up for a set

1. Paul323f
2. A L 3 X
3. Nick
4. Hafizkam
5. repta7
6.
7.
8.

**Posted:** Fri Dec 25, 2009 9:24 pm

1. Paul323f
2. A L 3 X
3. Nick
4. Hafizkam
5. repta7
6. Simondo
7.
8.

**Posted:** Mon Dec 28, 2009 12:50 pm

Ok brackets are made. Cant feel my hands no more in the cold.

**Posted:** Mon Dec 28, 2009 1:00 pm

Sweet! So now we got some brackets made, are we going to approach the company for a group but on the struts or are we goin to order them seperately? Good work Kenny, think you need a heater tho

**Posted:** Mon Dec 28, 2009 1:55 pm

Simondo wrote:

1. Paul323f
2. A L 3 X
3. Nick
4. Hafizkam
5. repta7
6. Simondo
7. Jasonwoolcott
8.

**Posted:** Mon Dec 28, 2009 11:49 pm

paul323f wrote:

Sweet! So now we got some brackets made, are we going to approach the company for a group but on the struts or are we goin to order them seperately? Good work Kenny, think you need a heater tho

Im gonna send the pair to offshore to see how much it is to get them fabricated. Just trying to bring down the cost as much as possible. I'll get them sent to him once he replies to my pm. I'll order the lifters as a group. If fabrication is going to cost more than me making it myself i will make everyone a pair haha, obviously paul you would be first on the list, approx 15-20mins a pair as i dont have a clamp to hold the piece of metal still when im trying to cut it lol

**Posted:** Mon Dec 28, 2009 11:52 pm

Cool, sounds good fella

**Posted:** Wed Dec 30, 2009 12:42 am

1. Paul323f
2. Jasonwoolcott
3. Nick
4. Hafizkam
5. repta7
6. Simondo
7.

**Posted:** Tue Jan 12, 2010 10:34 am

1. Paul323f
2. Jasonwoolcott
3. Nick
4. Hafizkam
5. repta7
6. Simondo
7. PardDhillon
8.

**Posted:** Tue Jan 12, 2010 2:23 pm

1. Paul323f
2. Jasonwoolcott
3. Nick
4. Hafizkam
5. repta7
6. Simondo
7. PardDhillon
8. 323f Rock

Group Buy - BA - Bonnet Lifters

Who is online