Good day gents

I got myself a after market alarm system and DIY the job i got the power, central locking, door open sensor working, indicators flashing, lock or unlock, siren hooked up all working now there`s these other wires the yellow for ACC and green for foot brake lock after start.

Will add photo for details of old and new system, I`m having trouble with which of these to bridge out or connect to the new system. the only wires I`m left with is the X2 white/black wires & one yellow/white & one red/white & X2 yellow/black and one yellow green and the last 2 red/white that seams to be for the fuel pump these are the only wires that turns the fuel pump on and talks to the starter. These cables are stranded/factory color cables. and these cables that are still connected to the old samcor unit is the only way that allows me to start and hear the fuel pump.

But which ones do i bridge out or connect to the new unit maybe someone has done this before, i don`t wan2 burn cables or replace fuses every 10sec haha

http://s1121.photobucket.com/user/y2k-b ... t=3&page=1

Neva mind sorted