Club323F
http://www.club323f.com/forum/

Steering rack part code req for a 4wd turbo
http://www.club323f.com/forum/viewtopic.php?f=53&t=23907
Page 1 of 1

Author:  remark70 [ Tue Feb 12, 2008 12:53 pm ]
Post subject:  Steering rack part code req for a 4wd turbo

Hi all

Can anyone help with a part code for a (RHD) Steering Rack for the BG Series, 4 Wheel Drive Turbo model??

Many thanks in advance!

Mark

Author:  dru [ Wed Mar 19, 2008 9:38 am ]
Post subject: 

I'm unsure of what the code is, but if you ask on fordlaser.com/forum they can give you an answer.

Author:  remark70 [ Sun Mar 23, 2008 7:06 pm ]
Post subject: 

Hi Dru - thx for posting. Will give it a try.
If anyone else has a clue or advice, any help is appreciated.
Thx again.

Author:  Matt [ Sun Mar 23, 2008 9:58 pm ]
Post subject: 

what's the reg and i'll see if i can get a hit on the EPC -i'll post what pics i can and get parts numbers for what you need (if possible)

matt

Author:  remark70 [ Mon Mar 24, 2008 7:44 pm ]
Post subject: 

Hi Matt - thx for your offer. Sorry, unfortunately I don't have reg(?) details, so whatever you can provide will be helpful. Mark

Author:  Neil F [ Mon Mar 24, 2008 8:47 pm ]
Post subject: 

The complete steering rack assembly, minus the steering column...
B456-32-110... followed by either an A B C or D depending on your chassis number. :wink:

Author:  remark70 [ Tue Mar 25, 2008 8:21 pm ]
Post subject: 

Matt - many thx for ur help. Much appreciated!

Author:  nimz77 [ Tue Jul 17, 2012 5:32 pm ]
Post subject:  Re: Steering rack part code req for a 4wd turbo

hi,this is my first post.and also this is my first car..hope all support me,
my car is mazda familia hatchback ,YOM 1992 and 1500cc EFI -DOHC-(bg5s-******)

im having main three problems in my car
1.Oil leak from power steering rack.

so when i checked it ,it need to replace.but in my country lot places they dont have and not in good condition.

so is there any compatible newer power steering rack model?

2.Oil leak from gear box speedo meter connetiong point>(i have already replaced o-ring also).but still oil leak there..so when i spoke to local macanic said i need to replace some major part in my gear box ...Please advise for get idea about what its.

3.also my car orignal tyre size is 14R*165 but my prvous car owner change to 13*70*175 with alloy.but some time my car hit road.

please advise me..
shall i replace with 14*70*175 (NEw set including alloy and tyre)

or any other solution??


hope experts...help me with this issue's....thanks lot....

Author:  Mobiius [ Fri Jul 20, 2012 5:17 pm ]
Post subject:  Re: Steering rack part code req for a 4wd turbo

You should start your own thread, rather than hijack someone else's. You'll get more answers that way.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/