| Club323F http://www.club323f.com/forum/ |
|
| turbo instal info wanted http://www.club323f.com/forum/viewtopic.php?f=46&t=28609 |
Page 1 of 1 |
| Author: | Sean364 [ Thu Oct 30, 2008 4:03 am ] |
| Post subject: | turbo instal info wanted |
i recently got a turbo from a friend from a rb25 not sure which turbo it is i know a custom exhaust manifold has to be fabricated. also i have a 1.6 l engine i want to know if i can use this turbo and what i need to get thanks |
|
| Author: | griff88 [ Thu Oct 30, 2008 8:54 pm ] |
| Post subject: | |
you can try..... u need to get a lot: manifold, downpipe, injectors, oil feeds, ecu an wiring. skyline turbo is MUCH too big. doubt weather it'll actually fit between rad and block. give it a go ad let us all know though. |
|
| Author: | Sean364 [ Thu Oct 30, 2008 10:29 pm ] |
| Post subject: | |
manifold and downpipe not a problem my dad has a fabrication company what size injectors can work what is oil feed for which ecu to get |
|
| Author: | lewp91 [ Fri Oct 31, 2008 12:25 am ] |
| Post subject: | |
not sure on the injector size.. but the oil from the sump on a new line to lube the turbo! and ecu's for the BA arent mappable so you need a mappable performance one.. have a google on custom turbo fabrications? |
|
| Author: | Sean364 [ Fri Oct 31, 2008 10:43 pm ] |
| Post subject: | |
[quote="lewp91"]not sure on the injector size.. but the oil from the sump on a new line to lube the turbo! and ecu's for the BA arent mappable so you need a mappable performance one.. have a google on custom turbo fabrications?[/quote] i was told i only need bigger injectors and a fuel pressure regulator and a biger fuel pump not a new ecu |
|
| Author: | Neil F [ Fri Oct 31, 2008 11:24 pm ] |
| Post subject: | |
When you say you have a 1.6 litre engine, do you mean in the car, or to go in the car? The ECU is not a learning one, and will therefore only fuel/time the engine to preset factory settings. Throwing a turbo in without a proper fuelling set up will cause not nice things to happen. 
|
|
| Author: | Neil F [ Fri Oct 31, 2008 11:25 pm ] |
| Post subject: | |
Ah, sorry..... just noticed your from Trinidad, hence the 1.6 engine.
Your engine comes with a turbo in the BF 323 GTX, so therefore all the fuel and ECU stuff will already be readily available from somewhere. Best bet would be the American Protege market.
|
|
| Author: | Sean364 [ Sun Nov 02, 2008 9:46 pm ] |
| Post subject: | |
thanks man so i can get an ecu to use what to search for |
|
| Author: | Neil F [ Sun Nov 02, 2008 9:54 pm ] |
| Post subject: | |
Search for B6T engine. Or 86 to 89 323 GTX. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|