Hi Guys

I changed the rear pads (after 2 warnings on MOT) and there was not a great deal left of them.

however, wound the calipair back and greased up where needed, however the new pads were tight onto the disks. i couldn't turn the wheel.

I had to take anti rattle plates off to get calipar back into place with a hammer.
Anyway, drove it to collect kids from school and it seems to have free'd off, but theres still a slight rubbing. is this normal?

Never had any go that tight on me.

Also the pads site slightly proud of the disc on the outside edge. the old ones did too as you could tell by the slight ridge.