| Club323F http://www.club323f.com/forum/ |
|
| Todays Job - FSE Pro Fuel Filter http://www.club323f.com/forum/viewtopic.php?f=3&t=6407 |
Page 1 of 1 |
| Author: | stuartspel [ Sat Dec 03, 2005 11:02 pm ] |
| Post subject: | Todays Job - FSE Pro Fuel Filter |
....and what a job it was too. all you folk that have changed a fuel filter on an F, RESPECT. I feel part of a new club now........its all done by feel rather than sight eh. Dont think my fuel filter had ever been changed so I order an FSE Pro number after seeing AndyM's post on a different thread from Demon Tweeks (£15ish). You can see through it and open it up to clean/change the filter element. 
|
|
| Author: | JAM [ Sat Dec 03, 2005 11:08 pm ] |
| Post subject: | |
Good Job there Stu mate........ Looks good! But would it have taken you as long as it did if you didn't have to polish the whole engine bay again to match that shiney new FSE 
|
|
| Author: | Ronin (Adam) [ Sat Dec 03, 2005 11:11 pm ] |
| Post subject: | |
I need to change my fuel filter too, are there any guides? I've searched but couldn't find any. Never done it b4 y'see... |
|
| Author: | stuartspel [ Sat Dec 03, 2005 11:16 pm ] |
| Post subject: | |
the only way I could of got photos for a guide is via a fibre-optic camera.....! and I dont know any budding proctologists to borrow one from. Its awkward. Real awkward. |
|
| Author: | fastmike [ Sun Dec 04, 2005 12:37 pm ] |
| Post subject: | |
Which size did you get then, I think I will buy one! |
|
| Author: | stuartspel [ Sun Dec 04, 2005 1:14 pm ] |
| Post subject: | |
Its the FSE Pro with 8mm push on. it matches the original but you will need to get a meter of 8mm hose too..... unless you have stretch armstrong type arms and plan on putting it in the same daft place. |
|
| Author: | andym323 [ Mon Dec 05, 2005 12:52 am ] |
| Post subject: | |
Nice one Stu, like the new position, should be much easier to maintain now  :D:D
Noticed any difference??? and is it made of glass
|
|
| Author: | stuartspel [ Mon Dec 05, 2005 8:25 am ] |
| Post subject: | |
Aint noticed any difference yet mate....apart from it took a while to start after I'd fitted it 
and I dont know if it is glass..... I tapped it on my teeth (usual test huh) and it sounded like it was. Dont fancy taking it for a trip out of my bedroom window though..... |
|
| Author: | Mark.T [ Mon Dec 05, 2005 9:53 am ] |
| Post subject: | |
Why would you have it in your bedroom - is it that good
Mark |
|
| Author: | GOGOBROOM [ Mon Dec 05, 2005 10:49 am ] |
| Post subject: | |
Mark.T wrote: Why would you have it in your bedroom - is it that good
Mark This is a Car forum ......
|
|
| Author: | Mark.T [ Mon Dec 05, 2005 11:13 am ] |
| Post subject: | |
|
Mark |
|
| Author: | Mark.T [ Mon Dec 05, 2005 11:14 am ] |
| Post subject: | |
|
I wondered how long that would take
Mark |
|
| Author: | JAM [ Mon Dec 05, 2005 11:38 am ] |
| Post subject: | |
Think the garage might be Stu's Bedroom- What with the ammount of time he spends in there and all
|
|
| Author: | andym323 [ Mon Dec 05, 2005 12:04 pm ] |
| Post subject: | |
| :D Nah, its the kitchen where 'e keeps the car, which is why its SO clean :D
|
|
| Author: | JAM [ Mon Dec 05, 2005 12:38 pm ] |
| Post subject: | |
LMAO 
|
|
| Author: | Mark.T [ Mon Dec 05, 2005 1:28 pm ] |
| Post subject: | |
Stu doesn't have a garage - he has a 'Surgery'
Mark |
|
| Author: | richardesty [ Mon Dec 05, 2005 10:11 pm ] |
| Post subject: | |
Top work there brother........ |
|
| Author: | andym323 [ Mon Dec 05, 2005 10:22 pm ] |
| Post subject: | |
Stu wrote: it matches the original but you will need to get a meter of 8mm hose too..... unless you have stretch armstrong type arms and plan on putting it in the same daft place.
What was it Robert Duval told that car in Days of Thunder??????
|
|
| Author: | Smotter [ Tue Dec 06, 2005 7:57 am ] |
| Post subject: | |
Something about enough fuel line to hold an extra gallon of gasoline ..... (?) |
|
| Author: | stuartspel [ Tue Dec 06, 2005 8:38 am ] |
| Post subject: | |
Aaahhhh Gents Jam, Andy & Mark - all three of you are right. Garage/Kitchen/Surgery. Let me explain- Although I used an extra meter or 8mm hose I removed (in my garage) the two old pieces of hose = 500mm. 500mm of 8mm hose is roughly 265cubic mm or 256ml or 0.056 gallon (worked out in my surgery). The amount of fuel in the original huge filter minus the amount in the new filter and hose = a weight saving of two apples (done in kitchen) and a fuel saving equal to half a cup of coffee. Pi squared x both apples and the coffee without the mug = an extra 1.2 seconds per lap round Silverstone – Bring on Trax 2006…… |
|
| Author: | Mark.T [ Tue Dec 06, 2005 8:48 am ] |
| Post subject: | |
|
Mark |
|
| Author: | Smotter [ Tue Dec 06, 2005 8:52 am ] |
| Post subject: | |
Nutter !!!!!
|
|
| Author: | andym323 [ Tue Dec 06, 2005 9:21 am ] |
| Post subject: | |
Oh my god!!, he's finally reavealed his true identity, Stu is...... DR.EVIL 
|
|
| Author: | JAM [ Tue Dec 06, 2005 11:34 am ] |
| Post subject: | |
LMFAO @ andy
|
|
| Author: | Chris_p19 [ Tue Dec 06, 2005 10:40 pm ] |
| Post subject: | |
Hmm might have to do that next time I give the moto a service, new filter meter of 8mm hose dnt sound to hard. But I havent tryed to get at the filter before. |
|
| Author: | stuartspel [ Tue Dec 06, 2005 10:55 pm ] |
| Post subject: | |
Mate give it a go, its only hard if you have arms with only one elbow each and are thicker than spaghetti…..!!! |
|
| Author: | Chris_p19 [ Tue Dec 06, 2005 11:09 pm ] |
| Post subject: | |
Well were see, and anyways it will be easy after Ive lost my temper and tore the whole engine out lol. So the meter hose replaces the old hoses. am I gna need some new clamps or will the old ones be ok if I havent lost them after ripping them off. |
|
| Author: | stuartspel [ Tue Dec 06, 2005 11:15 pm ] |
| Post subject: | |
The new metre of hose comes with two new clips as does a FSE Pro filter. these are the usual type of jubilee clips rather than the clamp type fitted as standard. Use either - I used the new ones....... |
|
| Author: | Chris_p19 [ Tue Dec 06, 2005 11:18 pm ] |
| Post subject: | |
Cheers now I got till I av time to service it to decide wot colour hose i want. |
|
| Author: | fastmike [ Thu Dec 08, 2005 12:07 pm ] |
| Post subject: | |
I did mine yesterday, and it's true you do need arms like stretch armstrong! I merely used the exsiting pipework, and it's just dangling somewhere down the back of the engine. Definetely worth doing. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|