| Club323F http://www.club323f.com/forum/ |
|
| Replace front hubcarriers for 1.8 brakes? http://www.club323f.com/forum/viewtopic.php?f=21&t=61362 |
Page 1 of 1 |
| Author: | ArtistKS [ Mon Oct 26, 2020 7:12 pm ] |
| Post subject: | Replace front hubcarriers for 1.8 brakes? |
I've got 1.8 hubcarriers, hubs and calipers all ready for the swap onto my 1.5 but was wondering how difficult it will be to get the 1.5 hubs off? |
|
| Author: | maZZda [ Mon Oct 26, 2020 7:25 pm ] |
| Post subject: | Re: Replace front hubcarriers for 1.8 brakes? |
You will need a hydraulic press or a big bad hammer! Not an easy task if you press them out of the factory bearings.. If they were changed before it will be easier. Cross fingers to get them out easy! |
|
| Author: | ArtistKS [ Mon Oct 26, 2020 7:50 pm ] |
| Post subject: | Re: Replace front hubcarriers for 1.8 brakes? |
press what out? I don't need to press any bearings out. The hubcarriers have the hubs in them and the bearings are fine. |
|
| Author: | maZZda [ Tue Oct 27, 2020 3:02 pm ] |
| Post subject: | Re: Replace front hubcarriers for 1.8 brakes? |
I'm not so sure that the splice count is the same between 1.5 and 1.8 driveshafts and CV's, hubs.. You will be the one to tell us if they are the same. |
|
| Author: | ArtistKS [ Wed Oct 28, 2020 7:37 am ] |
| Post subject: | Re: Replace front hubcarriers for 1.8 brakes? |
I've been told they are the same. I will probably replace the bearings in the 1.8 hubcarriers anyway as preventative maintenance but will need to look into whether the splines are the same first in that case. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|