Ba Alloy Fitments
323 BA (4 Stud) 94 to 98 / PCD - 4x100 / Offset - 35 to 45 / Bore - 54.1mm
323 BA (5 stud) 94 to 98 / PCD - 5x114.3 / Offset - 35 to 45 / Bore - 67.1mm
Edited by HughieW
| Club323F http://www.club323f.com/forum/ |
|
| wheel fitments for BA http://www.club323f.com/forum/viewtopic.php?f=19&t=46708 |
Page 1 of 1 |
| Author: | Drew [ Thu Jul 14, 2011 1:47 pm ] |
| Post subject: | wheel fitments for BA |
Ba Alloy Fitments 323 BA (4 Stud) 94 to 98 / PCD - 4x100 / Offset - 35 to 45 / Bore - 54.1mm 323 BA (5 stud) 94 to 98 / PCD - 5x114.3 / Offset - 35 to 45 / Bore - 67.1mm Edited by HughieW
|
|
| Author: | Marc S [ Thu Jul 14, 2011 2:54 pm ] |
| Post subject: | Re: wheel fitments for BA |
[quote="Drew"]Ba Alloy Fitments 323 BA (4 Stud) 89 to 98 / PCD - 4x100 / Offset - 35 to 45 / Bore - 54.1 323 BA (5 stud) 94 to 98 / PCD - 5x114 / Offset - 35 to 45 / Bore - 54.1[/quote] What BA was made in '89 mate? 
|
|
| Author: | RHRH [ Sun Jul 17, 2011 11:33 pm ] |
| Post subject: | Re: wheel fitments for BA |
And it's 5x114.3! 
|
|
| Author: | HughieW [ Sun Jul 17, 2011 11:46 pm ] |
| Post subject: | Re: wheel fitments for BA |
I've edited the original post - v6 information was incorrect
|
|
| Author: | Drew [ Mon Jul 18, 2011 11:10 am ] |
| Post subject: | Re: wheel fitments for BA |
haha i was rushing this was in work :P sorry for initial mistakes |
|
| Author: | marshymob [ Wed Feb 15, 2012 9:34 pm ] |
| Post subject: | Re: wheel fitments for BA |
new it was here somewhere 
|
|
| Author: | Debz [ Mon Feb 20, 2012 12:13 am ] |
| Post subject: | Re: wheel fitments for BA |
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|