its fairly simple, case of removing the rocker cover and taking the cams out and there they are
| Club323F http://www.club323f.com/forum/ |
|
| tappets http://www.club323f.com/forum/viewtopic.php?f=18&t=5277 |
Page 1 of 1 |
| Author: | Pyro16 [ Sat Sep 10, 2005 1:18 pm ] |
| Post subject: | tappets |
im starting to hear them, how hard are they to adjust/replace? any guides? |
|
| Author: | JDM [ Sat Sep 10, 2005 1:26 pm ] |
| Post subject: | |
i wanna know this aswell |
|
| Author: | Shaggy [ Sat Sep 10, 2005 1:30 pm ] |
| Post subject: | |
its fairly simple, case of removing the rocker cover and taking the cams out and there they are
|
|
| Author: | Mark.T [ Sat Sep 10, 2005 7:08 pm ] |
| Post subject: | |
Don't just take the cam shafts out!!! - you need to be careful. They can be snapped if you just loosen the bolts at one end. Try these: http://www.club323f.com/club323f/forum/ ... hlight=hla http://www.clubprotege.com/forum/showthread.php?t=11841 (you'll need to sign in for this one - but worth it (read the whole thread). Mark |
|
| Author: | stuartspel [ Sat Sep 10, 2005 7:20 pm ] |
| Post subject: | |
Mark - I thought noisey tappets were happy tappets....! |
|
| Author: | Mark.T [ Sat Sep 10, 2005 7:21 pm ] |
| Post subject: | |
I'm not the one complaining 
Mark |
|
| Author: | stuartspel [ Sat Sep 10, 2005 7:23 pm ] |
| Post subject: | |
No mate - previous forum post...! |
|
| Author: | 323boy [ Sat Sep 10, 2005 8:00 pm ] |
| Post subject: | |
you dont want them too noisy and i didnt think u could adjust them as i thought they were self adjustin. Once adjusted if u can put fully synthetic oil in it makes them even quiter. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|