i found a box for £100 with 3 months G from a mazda specialists cant remember the name but it included postage on a pallet next day!
| Club323F http://www.club323f.com/forum/ |
|
| Need help asap(please have a look senior members) http://www.club323f.com/forum/viewtopic.php?f=18&t=43303 |
Page 1 of 1 |
| Author: | deep2005 [ Mon Dec 27, 2010 4:34 pm ] |
| Post subject: | Need help asap(please have a look senior members) |
Hi guys as some of you may know ive bought a 1.8 s reg F. however after a week or so of owning it the driveshaft popped out ruining the gearbox, as the bit the shaft goes into got mangled!! Now ive looked high and low and cant find a box, for a reasonable price!just before i got this one i got a box for maisey with 50k on it for £100! Will the 1.5 box go on?looks similar, not sure if itll fit though, although i have tried a 1.5 shaft on the 1.8 and it fitted :S. Also the 1.8 use to be automatic so not sure what manual box is in it now the number on the box at the mo is....F5C7 if that helps? i really need help urgently as i need it back on the road! anyone seen a F in a scrappy.....around or near northamptonshire, willing to travel if the price is right too. The subject ive writeen isnt meant to offend anyone i just know some members like andym etc will have knowledge of all this..... cheers guys |
|
| Author: | deep2005 [ Mon Dec 27, 2010 4:35 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
also my mates garage has a 1.8 626 on a m reg, will that box work?even if it needs adapting... |
|
| Author: | deep2005 [ Mon Dec 27, 2010 10:55 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
anyone? |
|
| Author: | Shayne [ Mon Dec 27, 2010 11:21 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
I am not sure mate, but check the motor out and see if it is the same as yours, DOHC, if so it should fit, |
|
| Author: | lewp91 [ Mon Dec 27, 2010 11:24 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
i found a box for £100 with 3 months G from a mazda specialists cant remember the name but it included postage on a pallet next day!
|
|
| Author: | deep2005 [ Tue Dec 28, 2010 3:49 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
could you try dig up any details at all mate? Had a look at my 1.5 box and has the same part number as my 1.8, does andym still come on herE? |
|
| Author: | lewp91 [ Tue Dec 28, 2010 4:12 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
Lost it all mate sorry :/ mine was out a demio |
|
| Author: | deep2005 [ Wed Dec 29, 2010 6:51 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
ok no worries, Can someone with a 1.8 BA see what the part number on their gearbox is?? and also does anyone know if the driveshafts for the F series boxes are the same? cant work out what gearbox my car has :S |
|
| Author: | deep2005 [ Thu Dec 30, 2010 7:29 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
anyone help?  wish i never bought another F now should off moved on lol
|
|
| Author: | lewp91 [ Fri Dec 31, 2010 3:33 am ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
have you got a g of f gbox? theyre in alot of other cars best bet phoning breakers i did a gbox and 2 clutches on my BG one was because of the oil leak though tbh:P |
|
| Author: | RHRH [ Fri Dec 31, 2010 11:23 am ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
Only 1.8's prior to 1995 have the Gseries box... Where it said F5... it should read G5M... The rest of the 1.8's are using the same gearbox as the 1.5's the F series box, which you mentioned you already have as you stated the F5 bit... So just get a box out of any 1.8 or 1.5 FBA and your good! Maybee do the clutch while your at it...
|
|
| Author: | deep2005 [ Fri Dec 31, 2010 6:16 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
thank you ever so much mate! weight off my mind, so are the clutches all different?? |
|
| Author: | ph3n1x [ Tue Jan 04, 2011 5:03 pm ] |
| Post subject: | Re: Need help asap(please have a look senior members) |
yup, the 1.8 uses a 200mm clutch where the 1.5 uses a 190mm clutch. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|