| Club323F http://www.club323f.com/forum/ |
|
| Clutch for 1.8 BA? http://www.club323f.com/forum/viewtopic.php?f=18&t=43298 |
Page 1 of 1 |
| Author: | A L 3 X [ Sun Dec 26, 2010 10:36 pm ] |
| Post subject: | Clutch for 1.8 BA? |
How much approx will a 1.8 BA be from the motor factors such as Andrew Page, I would order from FPS but my mechanic wants to order it himself which should be from a motor factors as this means if anything goes wrong he can have it replaced  Also which one will a 96/P BA require as I gather there is 2 types? Cheers 
|
|
| Author: | ziggy323f [ Wed Dec 29, 2010 10:54 am ] |
| Post subject: | Re: Clutch for 1.8 BA? |
U tried to call them? give them your reg plate and they'll tell you the price. |
|
| Author: | Roc [ Wed Dec 29, 2010 1:55 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
He could order it from me 
|
|
| Author: | A L 3 X [ Wed Dec 29, 2010 6:37 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
Roc wrote: He could order it from me I wanted to order it from you mate but when I said i've found one for the price your selling them at he said he would need to order it himself(usually uses Andrew Page or KG Motaquip) because if he was to break it when fitting he could get a replacement or something? |
|
| Author: | ziggy323f [ Thu Dec 30, 2010 11:05 am ] |
| Post subject: | Re: Clutch for 1.8 BA? |
A L 3 X wrote: Roc wrote: He could order it from me I wanted to order it from you mate but when I said i've found one for the price your selling them at he said he would need to order it himself(usually uses Andrew Page or KG Motaquip) because if he was to break it when fitting he could get a replacement or something? Break a clutch?? lol what kind of garages do you go to lol |
|
| Author: | HughieW [ Thu Dec 30, 2010 11:27 am ] |
| Post subject: | Re: Clutch for 1.8 BA? |
I think most garages prefer to order the parts themselves - saves the customer ordering the wrong part and messing them about. At least if they order the wrong part, it's their fault and they can deal with it  Not sure how you can break a clutch...unless you fit it with an angle grinder? 
|
|
| Author: | ziggy323f [ Thu Dec 30, 2010 12:14 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
HughieW wrote: Not sure how you can break a clutch...unless you fit it with an angle grinder?
|
|
| Author: | A L 3 X [ Thu Dec 30, 2010 6:27 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
I've no idea, it is my gf's dad that will be doing it though so its not something I can argue about really , maybe you're right though Hughie as he does own his own garage but tbh I dunno why he won't just let me order it as I'm guessing it will be cheaper
|
|
| Author: | HughieW [ Thu Dec 30, 2010 7:07 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
Hmmm he should be alright with it then I would have thought I know when I fix people's compupers, I prefer to order parts myself - many times before I've told them exactly what's needed, and given them links on ebay to parts that they could buy, they order the wrong stuff - if you want a job done properly, it's best to do it yourself, sorta thing
|
|
| Author: | A L 3 X [ Thu Dec 30, 2010 7:53 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
True but i'm not exactly an idiot and would be ordering it from the correct suppliers shall I just leave it to him?
|
|
| Author: | HughieW [ Thu Dec 30, 2010 8:46 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
No but he doesn't know that does he?  You're dating his daughter, you're an idiot You could send him the FPS link and say I recommend this guy, but then I'd just leave it up to him
|
|
| Author: | RHRH [ Fri Dec 31, 2010 11:26 am ] |
| Post subject: | Re: Clutch for 1.8 BA? |
Just lolled so hard that my collegues are now looking at me strangely... |
|
| Author: | A L 3 X [ Fri Dec 31, 2010 12:23 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
Lmao at which bit RHRH? And yeh good point Hughie, cheers
|
|
| Author: | 9000kev [ Fri Dec 31, 2010 7:55 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
most garages like to order parts themselves so they can make a bit of money on parts prices, what ever it costs them from the suppliers you can garantee they have put there 10% on it before they bill you |
|
| Author: | A L 3 X [ Fri Dec 31, 2010 9:20 pm ] |
| Post subject: | Re: Clutch for 1.8 BA? |
thats the thing though he wouldn't do that, he ordered my new radiator at trade price for me. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|