try anglo japanese in derby, tell em ur in the club, tel 01332 381673, make sure you've got ur VIN number handy
£300 second hand sounds like taking the piss chap!
| Club323F http://www.club323f.com/forum/ |
|
| drive shafts http://www.club323f.com/forum/viewtopic.php?f=18&t=2778 |
Page 1 of 1 |
| Author: | jenksjenks99 [ Wed Mar 23, 2005 10:32 pm ] |
| Post subject: | drive shafts |
hi guys can anyone help with this one? It appears both my drive shafts are on there way out didnt think it would cost that much but the cheapest i could find around me is £300 for a pair of second hand ones where there is no real guarantee there isnt anything wrong with them already, thats through mill auto. Any ideas? Cheers Jenks |
|
| Author: | andym323 [ Wed Mar 23, 2005 10:52 pm ] |
| Post subject: | |
try anglo japanese in derby, tell em ur in the club, tel 01332 381673, make sure you've got ur VIN number handy
£300 second hand sounds like taking the piss chap! |
|
| Author: | Smotter [ Thu Mar 24, 2005 10:12 am ] |
| Post subject: | |
I doubt there's anything wrong with the drive shafts - I'm sure you should be looking at getting your CV Joints sorted ... 
|
|
| Author: | andym323 [ Thu Mar 24, 2005 10:17 am ] |
| Post subject: | |
very good point
|
|
| Author: | jenksjenks99 [ Thu Mar 24, 2005 11:49 am ] |
| Post subject: | |
would that be making the clicking noises when turning the wheels then? It started whenever i put the wheels on full lock but now its on most roundabouts and corners too. not the best noise to hear! would the cv joints cost less to do? |
|
| Author: | Mark.T [ Thu Mar 24, 2005 11:58 am ] |
| Post subject: | |
Yep, that'll CV joints and it'll cost you somewhere between £170 and £300 depending on where you go. Mark |
|
| Author: | jenksjenks99 [ Thu Mar 24, 2005 7:19 pm ] |
| Post subject: | |
Thanks, on that note, the steering is pulling bit by bit to the left when i drive, is that related? what is it? should i be worried because i do alot of miles at the mo. only had the tracking done a month ago so shouldnt be that. |
|
| Author: | 323boy [ Thu Mar 24, 2005 7:34 pm ] |
| Post subject: | |
it could b the cv joint on the left it either worn more or has less oil so it taking it to the left when u have ur cv joints done get the trackin done again |
|
| Author: | Mark.T [ Fri Mar 25, 2005 8:46 am ] |
| Post subject: | |
Worn CV joints aren't that much of a worry. The wheels won't fall off - they might just stop being powered one day - it's more the annoying knocking noise that will drive you to get them done. Mark |
|
| Author: | andym323 [ Fri Mar 25, 2005 11:26 am ] |
| Post subject: | |
Yeah, gotta do mine... again, i think it must be a little design flaw, this'll be my 3rd set in 4 years 
|
|
| Author: | Dragon Rob [ Fri Mar 25, 2005 11:47 am ] |
| Post subject: | |
[quote]i think it must be a little design flaw, this'll be my 3rd set in 4 years[/quote] Design flaw or how it's driven!!!! 
|
|
| Author: | andym323 [ Fri Mar 25, 2005 11:56 am ] |
| Post subject: | |
Oh design flaw definatly, who, me? chuck into bends regardless of speed, hee hee :-$ |
|
| Author: | classmaz [ Sat Mar 26, 2005 1:39 pm ] |
| Post subject: | |
ive just had my cv joint done 41 quid for the joint and 20 fitting. just need a new wheel bearing now as its still making the noise
|
|
| Author: | andym323 [ Sat Mar 26, 2005 4:06 pm ] |
| Post subject: | |
wow, where was that done mate? |
|
| Author: | Smotter [ Sat Mar 26, 2005 10:49 pm ] |
| Post subject: | |
What ever you do, avoid "Remanufactured" or "Reconditioned" CV's - saves you a couple of quid in the short term, but they really don't last, so you wind up spending much more on labour in the long run. Rather cough up the extra sheckels to buy proper new reputable brand CV's ...
|
|
| Author: | jenksjenks99 [ Mon Mar 28, 2005 6:58 pm ] |
| Post subject: | |
Just in case anyone ever has the same prob. the pulling was down to the fact that the boot on the cv joint had split all round and i had no grease at all left?! Got that fixed cost £20 and the steering is fine again. Still making the noise but then i cant afford to buy new cv joints! thanks for the help guys....Jenks |
|
| Author: | DuFFMaN [ Mon Mar 28, 2005 8:04 pm ] |
| Post subject: | |
[quote="jenksjenks99"]Just in case anyone ever has the same prob. the pulling was down to the fact that the boot on the cv joint had split all round and i had no grease at all left?! Got that fixed cost £20 and the steering is fine again. Still making the noise but then i cant afford to buy new cv joints! thanks for the help guys....Jenks[/quote] Thats a common MOT failure...more common with jap cars 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|