As I've been lurking here a lot lately, I thought it was time I finally put up some pics & info about my BA.
I've had it since 1999 (when it was 2 years old), it's just done 122k. It's a completely standard GXi, but unlike many owners I'm not going to mod the car: I'm keeping it absolutely standard (or as near to it as is practical), but I want to get it back to as near showroom condition as possible.
It's a solid car with very little rust: some minor spots of surface rust on the sills and on one of the doors, which I'm dealing with. The usual brown stuff underneath, and again some surface rust at the front under the radiator where the old rad was leaking, but the metal is still solid. It's been ultra-reliable in all weathers, and never had any engine trouble (although I have an occasional revs problem at the moment). The only significant issues have been the expected brakes, exhaust, bulbs & fuses, tyres etc. It usually sails through MOT, any fails in the last few years have been minor things like a delaminated number plate and some bulbs.
The only mods are alloy wheels. It came with high-spec alloys, I believe the first owner put them on - I've since had to replace them, as they started warping & leaking air around the rims. Currently I have some nice-looking but relatively inexpensive alloys (£300 for the set); I didn't want anything too flash as it would look out of place on an unmodded car (and as I spend a lot of time in London, I don’t want the hassle of risking them being nicked!) It does have a CD player, as the old Clarion cassette unit died several years back, but I guess that's a necessity these days, not really a mod.

Slam panel cleaned & painted black, as it was rusting.
As an early '97 P-reg it seems to be pretty much post-Ford, although for some reason it has a pre-Ford spoiler with the fittings for a third brake light (although as a post-Ford it came with a high-level third light as standard). The spoiler’s not in good nick paint-wise, so I bought a good replacement off Pinkers recently, which I'll put on while I refurb the original and decide whether to keep it.
The plan is to gradually start refurbing or replacing key mechanical parts where available, on the basis that by now a lot of them will be in need of it: new shocks & springs first come to mind, anti-roll bar bushes, etc. It passes the "bounce" test but the ride is definitely getting rough! Obviously "if it ain't broke don't fix it" – and as my daily driver I can’t have it off the road more than a day or so – but if I want to keep it on the road I need to anticipate eventual failures in some parts, and get them changed before they break at the worst possible time.
[img]http://i.imgur.com/zq3mjLf.jpg[/img]
[img]http://i.imgur.com/8QGbZ3J.jpg[/img]
[img]http://i.imgur.com/a3cPn5J.jpg[/img]
[img]http://i.imgur.com/Wtv83p2.jpg[/img]
[img]http://i.imgur.com/l2uQ163.jpg[/img]
(Heat shield not painted white, it's just bright sunlight!)
[b]Current jobs list in roughly the intended order:[/b]
[color=#BFBFFF]Finish sorting out minor rust on sills before autumn/winter [/color] - rust gone, anti-rust/ undercoats done
[color=#BFBFFF]Remove new rad, deal with rust on frame below it caused by leaky prev rad, put this one back[/color] [color=#FF0000]Rad replaced with brand new one, June 2016, rust on front crossmember cleaned up[/color]
[color=#BFBFFF]Oil & filter change[/color]
[color=#BFBFFF]Replace rear ARB bushes (not touching the front ones, have been warned they're a b*****!)[/color] Replaced March 2017 along with suspension
[color=#BFBFFF]Clean & prep hub/strut connection for eventual shocks replacement (solid with rust at the mo - need to see if bolts/nuts will come off)[/color] Not done before suspension replaced 2017
[color=#BFBFFF]Start getting parts (cashflow willing) - replace springs etc. as and when possible[/color] New shocks (GH), springs (Monroe), top mounts (Lemforder & Ashika) March 2017
[color=#BFBFFF]Get cat replaced[/color] - done July 2014
Get timing belt replaced (still have 20k miles before critical)
[color=#BFBFFF]Replace aerial[/color] - done August 2015
[color=#BFBFFF]Replace front right wiper linkage (dying)[/color] - done April 2016 & again Jul 2017
Swap spoiler - repaint original - [color=#FF0000]respray ongoing July 2015[/color]
Deal with minor dents & dings - [color=#FF0000]ongoing July 2015[/color]
Remove black plastic exterior parts where possible & re-spray [color=#FF0000]ongoing July 2015[/color]
Proper clean & polish, sort minor scuffs on alloys (mostly caused by careless garages where work being done

)
That lot should keep me going for a year or so ...
