my new zxi

**Posted:** Mon May 28, 2012 11:17 pm

ok you need this
http://www.ebay.co.uk/itm/170636767117? ... 1438.l2649
once you got it then pm me

**Posted:** Thu May 31, 2012 9:49 pm

ok been playing with this stuf its realy cool

this is how i did the rear panel

ok then i did this

**Posted:** Thu May 31, 2012 9:50 pm

Nice one

**Posted:** Thu May 31, 2012 9:55 pm

im finding it hjard to make it stick to the underbody but interior lighting its great stuf going to light up everthing lol

**Posted:** Thu May 31, 2012 9:56 pm

nice work morgan! i need some of this haha

**Posted:** Thu May 31, 2012 9:59 pm

yer but it needs a steady hand to solder

5 pints help for me :lol:

**Posted:** Thu May 31, 2012 10:01 pm

That's insane mate:) I want to do the inside in mine with red and white in the footwells so it changes when the door open and also do the speedometer to change after it goes to a certain rev:D

**Posted:** Thu May 31, 2012 10:08 pm

oooo that sound brill let me know how you get om im doing my footwells red but you have a true vision just working out in my head how it can be done

**Posted:** Thu May 31, 2012 10:12 pm

Ha that will be on the list in like a month;D but when I get to it you will know;)

**Posted:** Thu May 31, 2012 10:15 pm

i need the rev counter thing am ok sorting white to red on the doors wont nick your idea but the rev counter thing is very sexy

**Posted:** Thu May 31, 2012 10:18 pm

Rev counter was up already. Same setup just a few mods on the wiring of the needles and positioning;)

**Posted:** Thu May 31, 2012 10:22 pm

sweet let me know how you get on

**Posted:** Thu May 31, 2012 10:24 pm

Will do mate:):)

**Posted:** Thu May 31, 2012 10:54 pm

Good work mate. How did you manage to make the 323 and mazda logos clear so the light shines through.

**Posted:** Thu May 31, 2012 11:14 pm

when it was split a realy corse sand paper the a fine send paper nit to fine mined didnt want it clear. the silver wasnt thick enough to block the light so bit of spraying needed

had to mask each letter and number off the spayed it silver

**Posted:** Thu May 31, 2012 11:15 pm

its not finished yet ther will be one more thing diffrent from others i seen will post finished product

**Posted:** Thu May 31, 2012 11:34 pm

Quote:

when it was split a realy corse sand paper the a fine send paper nit to fine mined didnt want it clear.

Have you been drinking tonight mate, I didnt get any of that.. Maybe you had one to many when you were trying to keep a steady hand. :lol:

Im on the look out for a ZXI again, The Misses has agreed to sell her BA and take my Blue one, so I can a power machine.. Been looking everywhere and cant find any decend ones out there. Im also a little fussy on my specs. :lol:

**Posted:** Thu May 31, 2012 11:45 pm

sorry mate had a one or two wasnt very clear. i mean my rear logo is not finished yet got a few new things to do to it. sorry most of it is real bad spelling never been good at that but beer dont help... just get yourself a well loved zxi mine got i at 125k full service history one owner just by luck... the v6 growl is a great love for me and im sure it will be the same for you...
as for the logo, split the panel and where the txt is raised sand that off till you get clear red matey

**Posted:** Fri Jun 01, 2012 6:26 am

benidormdale wrote:

Quote:

when it was split a realy corse sand paper the a fine send paper nit to fine mined didnt want it clear.

Have you been drinking tonight mate, I didnt get any of that.. :lol:

morgans always pissed lmao

**Posted:** Fri Jun 01, 2012 1:35 pm

im not in the day time lol

**Posted:** Fri Jun 01, 2012 1:56 pm

. Hahahaha. Well there nothin wrong with a wee drink.. So wot you been up to the mate ?

**Posted:** Fri Jun 01, 2012 8:36 pm

ok arrived today my other thing for my rear board all the way from china

looks great but there is a problem

**Posted:** Fri Jun 01, 2012 9:26 pm

That will look great lit up at night,
Whats the problem, maybe we can help..

**Posted:** Fri Jun 01, 2012 9:29 pm

can you make it smaller :lol:

do you think it will look ok that big its the same size a a mazda 6 one but looks so cool
spoken to the guy in china for a possible bulk buy

**Posted:** Fri Jun 01, 2012 9:34 pm

Sorry mate I dont have a magic wand :lol:

I thought it looked a little big.
Post a pic up with it stuck on over the original and Ill tell you what it looks like, (with the whole car or panel in the pic)
To be honest I dont think it will look to bad.
Can the guy not make them a little smaller ?
But it does look good

**Posted:** Fri Jun 01, 2012 9:37 pm

i will give it a go.. and my chinese is as good as his english so see what we can do but it may just look cool cause its more up to date and if it was small it wouldnt stand out

... i am on it tomorow :lol:

**Posted:** Fri Jun 01, 2012 9:51 pm

Good stuff mate. Cant wait to see wot other surprises you have up your sleeve :lol:

Looks like my leather interior is a no go at the moment as the guy cant bring it up to Scotland due to a change in plans.

Was really looking forward to it.

**Posted:** Fri Jun 01, 2012 10:00 pm

i wanted leather but black but now im going for bucket seats and rear redone by my my man to match

**Posted:** Fri Jun 01, 2012 11:39 pm

Looks like the interior might be back on if he can fit it in the car.

Ohh and it black too. I liked the cream in SE edition but thought it would get dirty easy and I would be forever cleaning it.
Yeah I quite like the bucket seats aswel, I might do them in the front in the future,
I licked the look of these http://www.ebay.co.uk/itm/BLACK-BLUE-RE ... 993wt_1199
There loads more here http://www.ebay.co.uk/sch/i.html?_nkw=m ... m270.l1313

These are quit cheap as the come in a pair.

But I reacon it would be a pain in the a**e to fit.
Are you anywhere near Plymouth ?

**Posted:** Fri Jun 01, 2012 11:46 pm

they are lush i'm really liking them

http://www.ebay.co.uk/itm/BLACK-PVC-LEA ... 564a894c10
cream mmm ok but if you can get white and keep it clean now thats very sexy

Forum rules - Please read!

my new zxi

Who is online