Fitting variable speed intermittent wiper stork - Face lift

By Neil Ronca

Tools needed:-

• Philips screw driver
• Torch
• Wiper stork from a 2001 up Mazda Tribute, MPV, Mazda6 or 626 Euro model NOT U.S

Estimated time to fit is 5 - 10 mins.

1. Remove the 3 philips screws from under the steering wheel cowling, you might find it easier to find the screws with the torch.
   
   
   Put the screws in a safe place....
   
   
2. Seperate the cowling. This is a little hard, I used the screwdriver for this, by placing it just above the wiper stork and hitting the handle with my palm....
3. Remove the two plastic covers to reveal the switch...
4. Under the wiper switch there is a white connecting plug, Unplug it.
   
   
   
5. Remove two small gold coloured screws on the wiper switch... put them somewhere safe.
   
   
   
6. Slide the stork out of the cowling..
7. Slide the New veri-speed stork in its place into the cowling..
8. Plug in the white plug and test the new stork..... Does it work?? Yes Great!!
9. Screw back the two small gold screws.
10. Put the two plastic covers back and screw back the three screws from underneth the cowling..

You have just fitted youself a great little Mod :)