Recoding Remote Transmitters

1. All doors closed, ign on.
2. Remove ign key.
3. Open drivers door.
4. Insert ign key, turn ign on, turn ign off, remove ign key.
5. Insert ign key, turn ign on, turn ign off, remove ign key.
6. Insert ign key, turn ign on, turn ign off, remove ign key.
7. Press and release the drivers door switch.
8. Press and release the drivers door switch.
9. Press and release the drivers door switch.
10. Buzzer should sound once or doors lock/unlock themselves.
11. Press any transmitter button twice.
12. Buzzer should sound once or doors should lock/unlock.
13. If you have only one transmitter, wait 30 seconds. If you have 2 transmitters go to step 15.
14. Buzzer should sound four times or doors should lock/unlock four times.
15. Press any button twice on next transmitter.
16. Buzzer should sound once or doors should lock/unlock.
17. Wait 30 seconds.
18. Test both transmitters.

Each step should be carried out within 5 seconds of the previous one. Drivers door pin switch needs to be working (Check interior light op.) and room fuse needs to be installed.