Fitting a K&N 57i Induction Kit
By Neil (geetee)
Introduction
This is a guide for everyone who needs to know how to fit a K&N 57i air filter kit.
This guide was written by Neil (geetee) and is much better than K&N's own guide to fitting the kit.
The time taken to install the air filter is between 1.5 and 2 hours depending on experience.
If you are in serious doubt then get a mechanic to install it for you, but it should be ok for any amateur diy'er.
Instructions
The fiting kit contains the following items as shown in the picture below.












|