Rear Bumper & Brake Cluster Removal

First, remove plastic trim from inside boot area. Complete removal of side trims is not necessary. Then unplug the interior boot light Remove light clusters: The light clusters are held on with two screws at the rear and two 'push studs' on the side of the car. Remove the two screws nearest the boot lid. Push the light cluster horizontally away from the car. Then remove the screws underneath the lights and the four securing nuts (two each side) at the rear of the boot area. Also remove a similar sized nut (one each side) directly beneath one of the above nuts. These are accessed from underneath the car. Remove rear 'mudflaps': Remove bolts in inner wheel arch (1 each side). Detach numberplate lights. Remove securing nuts in inner boot area and the bumper should be free to come off.